TM Hughes & Son offers rewiring services for domestic and commercial properties in Basildon.
Our team of NICEIC registered Electricians provide safe, reliable and accurate rewiring services for any property, from single homes to large houses and commercial properties like retail stores and industrial units.
- NICEIC Registered
- Fully Insured
- Free No-obligation Surveys & Quotes
Does Your Property Require Rewiring?
For properties not yet 30 years old, rewiring will only likely be necessary if the system has been damaged.
However, it is recommended to have an inspection done every ten years to ensure the electrical system continues to meet safety standards and operate efficiently.
Landlords renting out a property must have their electrical systems inspected at the start of each tenancy or every five years.
TM Hughes will provide thorough inspections of your property’s electrical system so that you can rest assured your family or tenants (if you’re a landlord) are safe and secure while they reside in the building.
Properties built over 30 years ago often contain wiring that has seen better days.
An inspection of the property will determine whether or not the wiring is still suitable or if it needs replacing. If rewiring is required, this might be a partial replacement or a complete Rewire, depending on the electrical system’s condition.
If your property is home to an old, outdated electrical system, consider rewiring it.
Rewiring involves replacing the various components of the electrical system, such as its consumer unit, cables, switches and sockets.
This is especially important if these components are aged or worn out, as they can lead to short-circuiting, power surges, electrical shock, and even electrical fires.
Furthermore, a rewire may be necessary if you’re planning an extensive home renovation or remodelling project that could disrupt existing wiring.
Check Your Fuse Box
If you are a homeowner in Basildon, you may have a dated fuse box.
Fuse boxes were once standard, but now they are outdated and unsafe due to their inferiority to modern consumer units with RCD fuses (Residual Current Devices)
Modern consumer units with RCD fuses trip immediately in case of a fault cutting power.
RCDs provide much more protection than old fuse boxes and prevent dangerous electrical incidents.
If you have a traditional fuse box, you may need a full or partial rewire and must replace your consumer unit with a modern one.
Our Rewiring services give you peace of mind that your home and family are safe from electrical hazards.
Electrical Wires Age & Condition
Electrical wiring has constantly been evolving since its inception, and the latest regulations require all wiring to align with European standards.
The current wire colours are Brown (Live), Blue (Neutral) and Green & Yellow (Earth). If your home has up-to-date wiring with these colours, then it is unlikely That a rewiring service is necessary.
Nonetheless, your system should be inspected for any suspected faults or anomalies.
Before 2006, Red (Live), Black (Neutral) and Green & Yellow (Earth) were the standard wire colours for electrical systems. These colour wires may need replacing. An inspection by a qualified electrician will determine this.
Even further back, pre-1977 systems used Red (Live), Black (Neutral) and Green colours for their wiring systems. In most cases, these older wiring systems will need rewiring because they could be unsafe due to their 45+ years of age.
Before 1960 wires were sheathed in rubber, which deteriorates significantly over time. Rubber-coated cables from the ’60s are unsafe. For this reason, it is recommended that any property with this wiring should be Rewired ASAP.
Ultimately, the age and colour of your wiring can determine whether Rewiring is necessary. However, an inspection by a professional electrician will provide you with a definitive answer and ensure your safety while using any electrical system in the future.
Electrical Faults
Electrical issues can be caused by faulty wiring and manifest in various ways.
Tripping fuses, electric shocks from light switches and sockets, crackling sounds from arcing sockets or switches, discoloured sockets and switches, burning smells, and frequently failing light bulbs are all signs that your wiring may need replacing.
Part P Of The Electrical Safety Regulations
When any new electrical work is undertaken, it must meet the requirements of Part P Electrical Safety Regulations; this includes partial or full rewiring of existing systems and installation of new wiring.
All Rewiring work is undertaken stringently to the Part P Of The Electrical Safety Regulations.
The Rewiring Process
TM Hughes & Son Electricians have extensive experience carrying out full and partial rewires throughout Basildon.
We understand the disruption this type of work can cause, so use careful planning to minimise it.
Before the works begin, we will notify local building control of the new electrical installation and ensure all necessary paperwork is in place.
During the initial survey, we will establish what you want from your electrical system, discussing options such as sockets, switches and lighting.
The old wiring and any existing fuse boxes, sockets and switches are removed before any new wiring is installed.
Depending on your property, new wiring will be run inside walls or under floors.
All necessary components, such as consumer units, back boxes, switches and sockets, are fitted at this stage. In contrast, external appliances, such as boilers, ovens etc., are connected once everything is in place.
Once the works have been completed, we will provide you with certification to prove that a qualified electrician has undertaken the installation according to national standards and regulations.
Get A Free No-Obligation Survey & Quote
Please get in touch with us using the phone number or contact form below to book your free no-obligation survey and quote with one of our Electricians.
Hi, I’m Terry the founder and owner of TM Hughes & Son Electrical Services
Please get in touch using the Phone Numbers or Contact Form below